FMC-MIPI, 4 channels DSI/CSI MIPI solution in FMC Format

FMC-MIPI is particularly suitable for applications and R&D in Augmented Reality / Virtual Reality (AR/VR ). When combined with our Solar Express 120 (SE120), Zynq based board and its hard core Video Codec H.265/H.264, it offers a powerful COTS platform for most image/video processing requirements.

FMC-MIPI is an HPC FMC designed to provide connectivity between FPGA  on a carrier and 2x MIPI CSI-2 4 lanes input and 2x MIPI DSI2 4 lanes output interfaces. Module provides conversion from MIPI CSI-2 to parallel interface or vice versa to 2x  MIPI CSI2 4 lanes output. This means that concurrently, 2 MIPI based sensor/camera and 2 MIPI based displays could be supported concurrently. An adapter card is also supplied that can house 2 sensors / cameras.  Adapter cards for several MIPI based cameras from Sony and Onsemi are available for quick project development. The default adapter supplied with FMC-MIPI is  MIPI-IMX169-C and it can take two cameras modules based on the Sony IMX169 camera (lattice part number LF-C2P-EVN). Adapters for other cameras like IMX378 are available; please contact our support team to learn more. COTS cable for connecting FMC to adapter card is available; Samtec part number HLCD3003.00BHTH2.

FMC-MIPI can also be attached to Sundance  adapter cards to create an embedded solution. Thus will be a self contained hardware platform with power, FPGA resource,FLASH and 2 cameras, and interface to x2 MIPI-based displays.

MIPI CSI-2 inputs parameters

  • LP and HP modes supported;
  • 4 Lanes, up to 0.9Gbps each lane, total up to 3.6Gbps throughput;
  • I2C interface for camera control;
  • Conversion to 16-bit parallel bus;

MIPI DSI outputs parameters

  • 4 Lanes, up to 0.9Gbps each lane, total up to 3.6Gbps throughput;
  • I2C interface for display control;
  • Conversion from 18-bit parallel bus

Features

  • 2 on board MachXO3™  LCMXO3L-4300C-6BG256C FPGA from Lattice
  • Comes with IP cores developed by Lattice and ported and tested by Sundance DSP;
  • Two MIPI CSI-2 input interfaces with 4 lanes, up to 0.9Gb/s per Lane converted to two 14 bit parallel interfaces;
  • Each MIPI DSI-2 provides independent I2C interfaces to FMC HPC;
  • Two 18-bit parallel input interface converted to two MIPI DSI output interfaces with 4 lanes;
  • On board reference clock generator;
  • Supported video data formats for input(camera connection): RAW8/10/12/14, YUV422(8/10-bit), RGB565, user defined 8 bit, interface is 14 bit;
  • Supported video data formats for output(monitor connection): RAW8/10/12/14, YUV422(8/10-bit),YUV444, 666/565, user defined 8 bit, interface is 18 bits;
  • I2C interface level is VADJ.
  • Small foot print, HPC FMC module

Applications

  • Artificial Reality / Virtual Reality ( AR/VR )
  • High-end Image Processing
  • ASIC/SOC prototyping and development
  • Machine Vision
  • Industrial Automation
  • Video analysis
  • Machine Learning
  • Intelligence and security,
  • Defense

Click here for a 3D Model of FMC-MIP connected to adapter card

FMC-MIPI on PXIe700 card FMC-MIPI solder side Front bracket Camera adapter card solder side Camera adapter card solder side FMC-MIPI on carrier FMC-MIPI on adapter

Block Diagram

FMC-MIPI Includes FMC-MIPI hw module, and MIPI-IMX169-C, and IP core for Lattice FPGA on the FMC-MIPI
IMX169-module Sony IMX169 camera (lattice part number LF-C2P-EVN)
HLCD3003.00BHTH2 Samtec cable assembly for connecting FMC-MIPI to Adapter card