MPC-1700

Many of Sundance customers would like to receive their hardware solution inside a portable PC with all the development and demonstration software and the DSP/FPGA hardware pre-installed so that it can be used right away. Sundance provides two PCs as standard but other specifications are also available upon request.

SPECIFICATIONS

Chassis Specs

• Aluminum chassis with integrated 17" LCD monitor, keyboard and touchpad pointing device.
  • Lunchbox style chassis constructed of 2.2 mm aluminum alloy.
  • Integrated flat panel display and fold-out keyboard
  • Rubber corner bumpers.
  • Tilt-up feet under chassis.
  • Built-in speakers
• ATX power supply; 450-watt standard, up to 620-watt
• 3.5" drive (internal): 2 shock-mount drive bays for hard drives
• 5.25" drive: one 5.25" drive bay for optical drive or removable hard drive
• One slim drive bays for floppy disk drive (notebook type floppy drive)
• One slim drive bay for optical disk drive (notebook type optical disk drive)
• Includes soft towing case with wheels and handle
• Dimensions (W x H x D) 17.5 x 13.5 x 9.5 inch
• System weight: approximately 35 lbs.
• Shipping weight: approximately 55 lbs.

LEFT SIDE VIEW DESCRIPTION

1. Side protective door.
2. Expansion slot blanking covers.
3. 5.25" drive bay for optical disk drives or removable hard disk rack.
4. Cooling fans dedicated to CPU ventilation.
5. ATX form factor motherboard I/O connector panel.
6. Keyboard latch.

RIGHT SIDE VIEW DESCRIPTION

1. Tilt-up feet for the system enclosure.
2. Slim-type optical disk drive.
3. Slim-type floppy drive bay.
4. ATX power supply.
5. Cooling fan vents for dedicated hard disk drive bay ventilation fans.
6. Cooling fan vents for dedicated for add-on card ventilation fan.

INTERNAL VIEW DESCRIPTION

1. Cooling fan dedicated for add-on card ventilation.
2. Cooling fan dedicated for for hard disk drive bays.
3. Internal drive bays supporting two 3.5" hard disk drives.
4. Slim-type optical drive and floppy drive spaces.
5. Expansion card guides. Four full length expansion cards are supported.
6. System board area. A Micro-ATX motherboard is installed in this illustration.
7. Drive spaces for one 5.25" disk drive. Use it for optical disk drive or removable hard disk drive carrier.

SYSTEM FEATURES

• Microsoft Windows XP
• Workstation/Server board supporting single processor in LGA775 Package, Intel 3000 Chipset, 1066/800/533 MHz Front Side Bus.
• Intel Pentium Dual-Core Processor E2160, 1.8GHz, 800MHz FSB, 1MB L2 cache
• 1GB ECC DDR2 667 SDRAM installed; up to 8GB supported on 4 DIMM sockets
• 160 GB SATA hard disk drive
• DVD-RW optical disk drive
• Built-in SATA ICH7R controller supporting 4 SATA ports with RAID 0, 1, 5, 10 Support
• 1 (x8) PCI-Express, 1x 64-bit 133MHz PCI-X, 5x PCI 33MHz expansion slots
• On board XGI Z7Graphics with 16MB memory
• Two Gigabit LAN ports
• Six USB 2.0 compliant ports; 2 internal USB headers for 4 ports and 2 USB ports on rear I/O panel
• One VGA Port
• PS/2 keyboard and mouse ports
• One fast UART 16550 serial port, one header connector
• One parallel port header

MANAGEMENT FEATURES

POWER CONFIGURATIONS

• ACPI Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on

PC HEALTH MONITORING

• CPU: Monitors for CPU Cores,Memory +1.8V, Chipset +1.5V, VIT FSB, +3.3V, +5V, 12V, 3.3V Standby, +5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
• FAN: Total of six 4-pin fan headers with tachometer monitoring
• Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor (TM2) Support, PECI

A computer case is also available: