FMC

FMC-ADC500-5, ADC FMC HPC, 500MS/s 16bits

FMC-ADC500-5, ADC FMC HPC, 500MS/s 16bits
FMC-ADC500-5 is a High Pin Count (HPC) FMC module with 5 ADC channels each running at up to 500MS/s with a dynamic range of 16 bits. The module has 5 ADC31JB68 ICs from Texas Instruments together with an HMC7044 from ADI which is the source of clocks feeding the ADCs. Provision for external clock input...

Product Details...

FMC-DAQ2p5, ADC and DAC FMC,

FMC-DAQ2p5, ADC and DAC FMC,
FMC-DAQ2P5 is a JESD204B compliant module.
  • 1 x ADC 12 bits @ 2.7 GSPS
  • 2 x DAC 16 bits @ 2.8 GSPS
  • High Pin Count ( HPC ) FMC module
  • PXIe, PCIe, Stand-Alone ... platforms
  • External Clock up to 4 GHz
  • 100 MHz on-board VCXO

Product Details...

FMC-GPIO, providing IO interfaces to FPGA boards with HPC or LPC connectors

FMC-GPIO, providing IO interfaces to FPGA boards with HPC or LPC connectors
FMC-GPIO is a an FMC module that can act as an IO interface for an FPGA board with HPC or LPC FMC sites.

Product Details...

FMC-GPIO68SE, Conduction cooled HPC GPIO FMC with 68 Single Ended IOs with 3.3 and 5V tolerance.

FMC-GPIO68SE, Conduction cooled HPC GPIO FMC with 68 Single Ended IOs with 3.3 and 5V tolerance.
FMC-GPIO-68SE provides 68 Single Ended GPIOs through connector at the front bezel. The IOs are taken through level translator ICs which are auto sensing and can covert from 1.8V to 3.V, or 5V, and vice versa. There is a build option to make some or all of the IOs be pass through and not be...

Product Details...

FMC-MIPI, 4 channels DSI/CSI MIPI solution in FMC Format

FMC-MIPI, 4 channels DSI/CSI MIPI solution in FMC Format
This is a complete system solution for image processing. FMC-MIPI offers 2 CSI and 2 DSI channels for interfacing to MIPI based cameras /sensors and displays. It converts from MIPI to parallel interface for easy transfer to the FPGA on an FMC carrier card for more demanding processing. It includes two Lattice FPGAs which can...

Product Details...

FMC-SDR400 DUAL RF Multiple-Input/Output FMC for Software Defined Radio

FMC-SDR400 DUAL RF Multiple-Input/Output FMC for Software Defined Radio
FMC-SDR400 is a conduction cooled Dual RF multiple input/output module (MIMO) based on AD9361, 70MHz - 6GHz RF transceiver and AD9656 ADC for baseband sampling of less than 70MHz (input only in this range). A software delectable gain and tunable RF bandpass front-end section provides high RF sensitivity by allowing rejection of out-of-band-of-interest interfering signals.

Product Details...