FMC-CLV

FMC-CLV is an HPC FMC with 3 Full width 80 bits Camera link interface. Safe Power PoCL is available on all connectors. Board includes an AMD Artix-7 FPGA which will provide 3 Cameraink interfaces to the user and will transport Cameralink data (processed or unprocessed) to FMC via ten gigabits serial transceivers, using proprietary custom protocol.

One interface will use Mini CameraLink connectors, and the other two interfaces use 5034803200 FPC Molex connector with custom Sundance pin out. This pin out is compatible with previous FMC-CL card.

FMC-CLV is compatible with Vita 57.1. 

AMD XC7A15T-1FGG484 is at the heart of this module. It interfaces with the Camerlink cameras and utilizing Sundace DSP firmware to capture the images and transfer to FMC carrier via serial transceivers. Or it can just transfer the captured data from Cameralink  to FMC carrier without any sorting or processing of the pixels. The module is compatible with the latest Cameralink V2.1 standard and has the following  improvements and features:

• Detailed jackscrew dimensions: Improves mechanical compatibility across devices.
• Bit positions for all tap formats: Fully documented for easier implementation and debugging.
• FPGA emulation support: Enables products to emulate Channel Link chips, expanding hardware flexibility.
• Updated serial port API: Fixes long-standing limitations in serial communication.
• Mandatory PlugFest testing: All v2.1 products must pass interoperability testing to ensure compliance.

Since the module transfers data to the FMC carrier via serial links, it remains agnostic to the I/O voltages supported by the carrier-side device. This makes it well-suited for use with Versal devices, which typically operate at lower I/O voltages.

FMC-CLV is the successor to our successful and popular FMC-CL. This module is Made in USA.