PXIe-PCIe8

The PXIe-PCIe8  is designed for rapid firmware/application development and testing of PXIe peripheral 3U boards, without the need for a PXIe chassis. It allows you to connect any PXIe peripheral 3U board to your PC via a PCIe x8 interface, and access its features and functions through a SMBus interface. It also provides test points and loops for measuring and monitoring PXI_TRIG and PXIe_DSTAR signals, as well as user LEDs for indicating PXI_TRIG[0,1] status. It has dip switches for selecting the slot address of the PXIe peripheral board, and on-board crystal oscillators for generating 100-MHz and 10-MHz PXIe clocks. It can be powered by either the PCIe slot or an external power connector, with 12-V and 3.3-V supply voltages.

With PXIe-PCIe8, you can easily and quickly develop and test your PXIe peripheral 3U boards, without investing in a PXIe chassis. It is ideal for prototyping, debugging, and validating your PXIe applications.

Features

• PCIe x8 interface to PC: This provides a high-speed data connection between the board and the PC.

• SMBus interface via pin header: This allows you to access and control the features and functions of the PXIe peripheral board through a simple serial bus.

• PC PCIe slot plug-in: This enables you to plug the board into any available PCIe slot on your PC, without the need for a PXIe chassis.

• 3U PXIe peripheral board slot: This accepts any PXIe peripheral 3U board that you want to develop and test.

• Dip switches for slot address selection: These let you select the slot address of the PXIe peripheral board, which is required for JTAG and SMBus communication.

• Test loops for PXI_TRIG and PXIe_DSTAR signals: These provide test points and loops for measuring and monitoring the trigger and differential star signals of the PXIe peripheral board.

• User LEDs for PXI_TRIG[0,1] signals: These indicate the status of the trigger signals of the PXIe peripheral board, which are used for synchronization and timing.

• On-board crystal oscillators for PXIe clocks: These generate 100-MHz and 10-MHz reference clocks for the PXIe peripheral board, which are required for data conversion and signal processing.

• Power supply options: This board can be powered by either the PCIe slot or an external power connector, with 12-V and 3.3-V supply voltages.

Applications

  • Rapid firmware development and testing
  • High-performance data acquisition and signal processing
  • Multi-chassis system integration

 

 

PXIe-PCIe8 Front PXIe-PCIe8 attached to PXIe card

 

Block Diagram

 

PXIe-PCIe8 Block Diagram

Placement diagram: TBD

No BSP is available for this product.

 

PXIe-PCIe8

Contact SundanceDSP support for customization options