Category Archives: Carriers/Platforms

SE200-component-no-module

Solar Express 200 (SE200)  is an x8 Gen3  PCIe carrier board with two SoM-PF m(System on Module) sites. The 2 SoMs that can be supported on this carrier are SoM-PF1 and PF2 which are based on MPF500-1FCG1152 and  MPF300T-1FCG784E respectively. Site 1 is typically designed for SoM-PF1 but if SoM-PF2  is plugged into that position then only PCIe, Firefly, SFP+, and 4 lanes of high-speed serial links for the FMC interface will be available. The board is designed for development purposes and plugs into a PC’s PCIe slot and is powered by a PCIe interface. An FMC slot, SFP+ module, x2 Samtec FireFly, USB, and other peripherals are available on the carrier card.

Read More

Front- IO and PC104p

PC104P PolarFire FPGA peripheral (endpoint) board is designed for rapid application development. This is a PCIe104 TYPE 3 peripheral board with stack-up and stack-down connectors. Board can be used as End-Point in stack-up configurations only for connection to StackPC host, and stack-down connector is used for connection to an adjacent peripheral module. This board offers an HPC FMC site for adding additional features/functionalities.

Read More

SE125 is a low profile, 8 lanes PCIe card powered by the Xilinx  Zynq Utrascale+ MPSOC (XCZU7EV-2FFVC1156E. Designed for Data Center application for simultaneous 4K video encode/decode4K video streaming . The onboard Zynq supports integrated H.265 hardware encoders and decoders.

Read More

Using Xilinx Zynq UltraScale+ MPSoC family, SE120 is an x8, Gen4 PCIe board. It can be assembled with the XCZU7EV-2FFVC1156E /XC ZU7EG/ XCZU11EG/ or ZU7CG. Depending on the choice of device it can be used for applications in HPC, digital communication, image processing, and AR/VR. When using a 7EV device the video encoder/decoder unit (VCU) can be used for video streaming applications.

Read More

SE120 utilizes the  Xilinx Zynq UltraScale+ MPSoC family in  C1156 package.  SE120 is a Gen4 x8 PCIe board. It can be assembled with the XCZU7EV-2FFVC1156E /XC ZU7EG/ XCZU11EG/ or ZU7CG. Depending on the choice of FPGA it can be used for applications in HPC, digital communication, image processing, and AR/VR. By cascading multiple SE120s multiprocessing systems can be easily created.

Read More

The EMC²-DP is a PCIe/104 OneBank” Carrier for Sundance SOM3 module based on PolarFire. It is also compatible with  Trenz SoC Module and has expansion for a VITA57.1 FMC” LPC I/O board  and also has I/O pins, using a 100-way Samtec RazorBeam connectors system.

Read More

SE200-component-no-module

SE200  is a x8  Gen3 PCIe carrier card for housing 2 PolarFire FPGA SoM modules from Sundance DSP. PolarFire is the latest FPGA from Microsemi with many advanced features like low power, high security and powerful embedded hard IP cores including RISC processor and JSD204B, and many more.

Read More

  • PCIe/104 OneBank I/O board
  • Xilinx Kintex UltraScale KU35 SoM for I/O Interface and processing
  • PCI Express Gen 2 compatible and integrate PCI Express switch
  • An infinite number of EMC²-KUxx can be stacked for large I/O solutions
  • Expandable with any VITA57.1 FMC I/O Module for more flexibility
  • 96mm x 90 mm PC/104 Form-Factor with Cable-less Break-Out PCB Connector

Read More

  • HDMI Input/Output FMC module (FMC-IMAGEON)
  • HDMI input
  • HDMI output
  • Interface for ON Semiconductor VITA image sensor modules
  • Video clock synthesizer

Read More