Category Archives: FMC
FMC-A429, module with 2/4 Receivers & 2/4 Transmitters, 429 channels
The FMC-A429 is the world’s first VITA57 FPGA Mezzanine module to offer ARINC-429 function.
FMC-CAN, Mezzanine Dual/Quad CANbus
The FMC-CAN is a Dual or Quad CANbus with autotest capabilities.
FMC-SER, is a VITA57 FPGA Mezzanine I/O module
The FMC-SER is a VITA57 FPGA Mezzanine module provides Serial I/O function.
FMC-1553, FMC Mezzanine module 2 or 4 channel MIL-STD1553
The FMC-1553 is world’s first VITA57 FPGA Mezzanine module to offer MIL-STD1553 function.
FMC-MIPI, 4 channels DSI/CSI MIPI solution in FMC Format
This is a complete system solution for image processing. FMC-MIPI offers 2 CSI and 2 DSI channels for interfacing to MIPI-based cameras /sensors and displays. It converts from MIPI to a parallel interface for easy transfer to the FPGA on an FMC carrier card for more demanding processing. It includes two Lattice FPGAs which can be used for processing incoming or outgoing data. The module, therefore, can be sued for embedded applications and without any FPGA carrier card.
FMC-SDR400 Dual RF Multi I/O FMC for Software Defined Radio
FMC-SDR400 is a conduction-cooled Dual RF multiple I/O modules (MIMO) with 70MHz – 6GHz RF transceiver and sampling of less than 70MHz. Provides high RF sensitivity.
FMC-ADC500-5, ADC 500MS/s 16bits
FMC-ADC500-5
- 5 x ADC 16 bit @ 500MS/s
- High Pin Count ( HPC ) FMC module
- Trigger Input, External Clock up to 4 GHz
FMC-GPIO, HPC and LPC I/O interface
FMC-GPIO is an FMC module that can act as an I/O interface for an FPGA board with HPC or LPC FMC sites.
FMC-CL, Cameralink frame-grabber
FMC-CL is a Camera Link FMC (FPGA Mezzanine Module) that interfaces to quad BASE, MEDIUM, and dual FULL and Extended FULL Camera Link compatible cameras.
The FMC/CL has a variety of I/O capabilities:
- 2 x SATA connectors
- 4 CL connectors, can be used as a general-purpose I/O.
- 1
- 2