FMC-ADC500CD
The FMC-ADC500CD is a HPC FMC card with 4 channels of ADC with 1GSPS sampling and 16-bit resolution and 4 channels of DAC with 2.8GSPS sampling and 16-bit resolution. The ADC and DAC are interfaced via JESD204B.
FMC-CL
- Dual Base, Quad Base, Medium, Full and Extended Full CL configuration
- PoCL (Power over Camera Link) support
- Up to 85 MHz data rate
- ESD protection for all Camera Link signals
FMC-GPIO68SE
- 68 Single Ended IOs or 34 differential pairs without level translation
- Auto sense, level translation of all or some of the IOs from 1.8V to 3.3 or 5V
- Pass through option
- 3 differential pairs through 6x Samtec connectors RSP-122811-01
FMC-RSxxx-8
- LPC FMC with RS422 or RS485 or RS232 input interfaces
- All output interfaces are ESD protected, ESD protection built in IC;
- Main IC is SP339EER1-L
FMC-SDR400
- 2 RF Channels, DC to 6 GHz acquisition
- Software tunable Channel Bandwidth 200 kHz-56 MHz
- 2 x Multiple Synchronized Input and output
- AD9361 Dual 12 bits transceivers
FMC-DAQ2P5
- 1 x ADC 12 bit @ 2.7 GSPS
- 2 x DAC 16 bit @ 2.8 GSPS
- High Pin Count ( HPC ) FMC module
- PXIe, PCIe, Stand-Alone platforms
FMC-GPIO
- FMC module that can act as an IO interface for an FPGA board with HPC or LPC FMC sites
- 2 x SATA connectors
- 4 x 26 pin SDR type connectors that can be used as a general purpose I/O.
FMC-SER
- FMC LPC connector (Type HPC can also be mounted)
- 4 or 8 configurable channels RS232/422/485
- Baud Rate 10Mbps in RS485/422 mode, 1Mbps in RS232 mode
FMC-1553
- FMC LPC connector (Type HPC can also be mounted)
- Transceivers HI-1579PCI
- Transformers DB2725EX
- Front panel connector SCSI 50 pin
FMC-SDR400D
- The FMC-SDR400D is based on AD9361 Transceivers IC, with Low Noise Amplifier (LNA) at RX channels.
- Tx channels contain 20 dB amplifier IC.